PHILLIPS TEMRO INC DIVISION OF BUDD CO INC -- 605-3252,605-3253 ZERO-START DIESEL ENGINE STARTING FLUID -- 6850-00D007284
===================== Product Identification ===================== Product ID:605-3252,605-3253 ZERO-START DIESEL ENGINE STARTING FLUID MSDS Date:04/10/1990 FSC:6850 NIIN:00D007284 === Responsible Party === Company Name:PHILLIPS TEMRO INC DIVISION OF BUDD CO INC Address:9700 W 74TH ST City:EDEN PRAIRIE State:MN ZIP:55344 Country:US Info Phone Num:800-328-6108/612-941-9700 Emergency Phone Num:800-328-6108/612-941-9700 CAGE:6Y402 === Contractor Identification === Company Name:BALKAMP INC Address:2601 S HOLT ROAD Box:City:INDIANAPOLIS State:IN ZIP:46241 Country:US Phone:317-244-7241 CAGE:70842 Company Name:NAPA Box:UNKNOW CAGE:0NBN5 Company Name:PHILLIPS TEMRO INC DIVISION OF BUDD CO INC Address:9700 W 74TH ST City:EDEN PRAIRIE State:MN ZIP:55344 Country:US CAGE:6Y402 ============= Composition/Information on Ingredients ============= Ingred Name:CARBON DIOXIDE CAS:124-38-9 RTECS #:FF6400000 Other REC Limits:NONE RECOMMENDED OSHA PEL:5000 PPM ACGIH TLV:5000PPM/30000STEL;96 Ingred Name:ETHYL ETHER (CERCLA); DIETHYL ETHER CAS:60-29-7 RTECS #:KI5775000 Other REC Limits:NONE RECOMMENDED OSHA PEL:400 PPM ACGIH TLV:400PPM/500STEL; 9596 EPA Rpt Qty:100 LBS DOT Rpt Qty:100 LBS Ingred Name:N-HEPTANE CAS:142-82-5 RTECS #:MI7700000 Other REC Limits:NONE RECOMMENDED OSHA PEL:500 PPM ACGIH TLV:400 PPM/500STEL;9596 Ingred Name:MINERAL OIL-NAPTHENIC CAS:64742-13-8 Other REC Limits:NONE RECOMMENDED ===================== Hazards Identification ===================== LD50 LC50 Mixture:ORAL LD50(RAT)=1.2G/KG FOR ETHER Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO Health Hazards Acute and Chronic:RESP IRRITATION MAY OCCUR ABOVE 200PPM.INHAL:INTOXICATION,DROWS,STUPOR & POSSIBLE UNCONSCIOUSNESS.SKIN:CRACKING & DRYING OF SKIN IF OVEREXPOSED.INGEST:NAUSEA.EYE:IRRIT. Explanation of Carcinogenicity:PER MSDS:NTP/IARC/OSHA:NO. Effects of Overexposure:RESPIRATION IRRIT, INTOXICATION,DROWSINESS,STUPOR,UNCONSCIOUSNESS,CRACKING/DRYING OF SKIN NAUEA,EYE IRRIT. Medical Cond Aggravated by Exposure:MAY AGGRAVATE BREATHING OR NERVOUS DISORDERS. ======================= First Aid Measures ======================= First Aid:INHAL:ACUTE INHAL LC50(2.5HRS)=73000PPM(RAT)FOR ETHER.REMOVE TO FRESH AIR.SKIN:FLUSH WELL W/WATER.INGEST:DONT INDUCE VOMIT.DRINK WATER OR MILK.CALL PHYSICIAN OR POISON CONTROL CENTER IMMED.EYE:FLUSH W ELL W/WATER.CONTACT PHYSICIAN. ===================== Fire Fighting Measures ===================== Flash Point Method:TCC Flash Point:-56F,-49C Autoignition Temp:Autoignition Temp Text:NP Lower Limits:1.8 Upper Limits:48.0 Extinguishing Media:DRY CHEMICAL, CO2, WATER (FOG OR MIST ONLY), ALCOHOL FOAM. Fire Fighting Procedures:AVOID POSSIBLE ACCUMULATION OF FLAMM VAPORS AT LOW LEVELS AS VAPOR IS HEAVIER THAN AIR.SELF-CONTAINED BREATHING APPARATUS SHOULD BE WORN WHILE FIGHTING FIRES. Unusual Fire/Explosion Hazard:AVOID BURSTING OF CYLINDERS.DO NOT STORE WHERE TEMPERATURES MAY EXCEED 160F.DO NOT PUNCTURE OR INCINERATE. ================== Accidental Release Measures ================== Spill Release Procedures:KEEP AWAY FROM HEAT/SPARKS/FLAMES.VENTILATE AREA.CO2 MAY BE USED AS PRECAUTIONARY VAP BLANKET.SMALL AMOUNTS MAY BE FLUSHED W/WATER. Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER. ====================== Handling and Storage ====================== Handling and Storage Precautions:DONT STORE WHERE TEMPS MAY EXCEED 160F.DONT STORE NEAR HEAT/FIRE/FLAMES/SPARKS. Other Precautions:NONE SPECIFIED BY MANUFACTURER. ============= Exposure Controls/Personal Protection ============= Respiratory Protection:IF TLV IS EXCEEDED WEAR NIOSH APPROVED BREATHING DEVICE OR RESPIRATOR. Ventilation:LOC EXHAUS:ADEQUATE TO MAINTAIN VAPORS @LESS THAN 400 PPM,ESPECIALLY @FLOOR LEVELS AS VAPS ARE HEAVIER THAN AIR. Protective Gloves:NITRILE OR IMPERVIOUS Eye Protection:SAF GLASSES OR GOGG RECOMMENDED Other Protective Equipment:NITRILE CLOTHING IF THERES POTENTIAL FOR PROLONGED CONTACT. Work Hygienic Practices:FOLLOW STORAGE AND HNDLG PROCEDURES SHOWN ABOVE. Supplemental Safety and Health ONLY DIFFERENCE IS IN "HOOK-UP"FITTING SIZE. FLASH PT/FLAMM LIMITS/BOILING PT FOR DIETHYL ETHER. ================== Physical/Chemical Properties ================== HCC:G2 Boiling Pt:=34.4C, 94.F Melt/Freeze Pt:M.P/F.P Text:NA Decomp Temp:Decomp Text:NP Vapor Pres:150 PSIG Vapor Density:2.5 Spec Gravity:0.70 pH:NP Viscosity:NP Evaporation Rate & Reference:0.60, BUTYL ACETATE=1 Solubility in Water:6%, MODERATE Appearance and Odor:PALE YELLOW TO CLEAR LIQUID, STRONG ETHEREAL ODOR.EVAPORATES QUICKLY, CYLINDER Percent Volatiles by Volume:100 Corrosion Rate:NP ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES STRONG OXIDIZERS. Stability Condition to Avoid:GENERALLY STABLE.EXPLOSIVE PEROXIDES MAY FORM BY EVAPORATION,PROCESS FAVORED BY EXPOSURE TO AIR & LIGHT. Hazardous Decomposition Products:CARBON MONOXIDE AMY FORM ON COMBUSTION. ==================== Disposal Considerations ==================== Waste Disposal Methods:DISPOSE OF PROMPTLY IN SEALED METAL CNTNRS IAW ALL LOCAL, STATE AND FEDERAL REGULATIONS.AVOID CONTAMINATION OF GROUNDWATER. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.